No Vibration Transmission-Turret Punch Presses

DYNEMECH-PUNCH-PRESS-MOUNTS

Precision metal fabricators and sheet metal components manufacturers depend on Dynemech vibration isolation mounts for isolating their highly accurate CNC Turret Punch Presses from vibrations.

 

Vibration-Free-Shop-Floor

Recognizing how important it is to provide fast, flexible responses to customer demands, many sheet metal pressed and fabricated components manufacturers are using the latest CNC Manufacturing machines for the same. But, increased feed and cutting rates also leads to increased vibration and noise. And thus, if these vibrations hamper production accuracies or increase maintenance issues and production cost all productivity gains are offset.

Turret-Punch-Press-on-Dynemech-Wedge-Mounts

CNC turret punching is a cost effective method for cutting sheet steel in moderate to long runs, rapidly integrate processes to eliminate post operations. It has vast tooling potential for the increased versatility translating into the ability to produce variety of components without re-tooling.  CNC turret punch press is widely used in many varieties of sheet metal processing industries , such as Automobile , air conditioning & refrigeration mfg., textile & pharma machinery mfg., communications, electronics ,computers, elevators , air conditioning, kitchen utensils , mechanical housings processing industries.

Turret Punching Press Installed On Dynemech Wedge Mounts

Turret Punch Press on Wedge Mounts Series, DB8-i

Dynemech anti vibration pads ensure that even at maximum tonnage, vibrations are not carried over to the table delivering increased precision and high quality parts, not to mention improved tooling life. The electronics and laser controls is isolated from punching vibration to help maintain beam integrity and cut quality.

In impact generating machines like turret punches anti vibration flexible pads convert low duration of impact in to an impulse of a longer period. Longer the natural vibration period of the machine, isolator & foundation system, lower will be the vibration transmissibility. Thus, vibration isolators produce a time delay and act as a source of temporary energy storage and to some extent as a energy damper which evens out the disturbing vibration in each oscillation. The elastic (potential) energy of the dampers transforms into motion (kinetic) energy of the machine and back into potential energy of the isolator, and so on. In reality, there are always some losses of the energy (usually, into thermal energy) due to friction, imperfections etc. As a result, the total energy is gradually decreasing (dissipated), thus diminishing the intensity (amplitude) of the isolated system. i.e. vibration damping.

Turret Punch Press on Dynemech Wedge Mounts, Series DB

Dynemech precision wedge mounts also provide flexible machinery installation options along with mitigation of vibration and noise transmission from metal cutting machines to other machines in the shop floor. To improve the vibration and noise isolation effect, wedge mounts are usually combined with Di insulation plate having Coefficient of friction 0.8 and natural frequency range of 25 Hz -7 Hz depending on the load of the machine. These sturdy machine vibration pads limit the swift horizontal jerks caused by rapid material movement besides vibration transmission and vibration isolation.

For more details about Anti-Vibration mounts kindly contact us:

http://www.vibrationmountsindia.com