Dynemech Vibration Isolators Allow Installation on Mezzanines & Upper Floors

Dynemech Vibration Isolators 

Allow Installation on Mezzanines & Upper Floors

As we know today that builders save cost on modern floor slabs by making them thinner and lighter and increasing column spacing. This tends to make modern composite floors flexible and oscillatory. As a result, newer buildings often do not dampen vibrations as well as older ones. Add to this the noise and vibrations transmitted from nearby construction, manufacturing, transportation systems or HVAC installations in the same buildings. Moreover, high prices of real estate in modern cities have propelled air-tight developments and compact construction which necessitate accommodation of large number of high speed production machinery, office complexes and sensitive machinery and equipments in the same buildings. Thus, mezzanine floors and upper floors are added as a cost-effective way to increase square footage not only for storage but also for production purposes. And of course, vibrations are present in all operations involving machines and motion due to inherent exciting forces. But, such excessive vibrations, may lead to structural and mechanical failures, frequent breakdown and maintenance of machines, human discomfort and noise. Hence, cost effective measures need to be taken to reduce the vibrations within acceptable limits.

 Fig1a: Drawing of building being affected by Vibration

 Fig1b: Drawing of building after Dynemech Vibration Isolation Solution

DYNEMECH vibration dampeners provide lower natural frequency than the frequency of the suspended floor (generally, the natural frequency of the pads should less than half of the frequency of the suspended floor) so that resonance is avoided besides, decreasing vibration amplitudes. 

Dynemech will need to know how much the machinery is shaking. Then based on the machine shaking and other factors affecting the structural vibrations, we have the task of designing the vibration isolators for the machinery to achieve the desired response on the roof.

  

We have successfully installed large industrial machines on mezzanine and upper floor including roof-tops:

 

Fig2: Blower installed on Rubber Air Springs on upper floors

 

Compressor Vibration isolation Mounts

 Fig3: Compressor installed on Spring Isolators on upper floors

 Fig4: Rubber Mixing Mill installed on Spring Isolators on upper floors

Fig5: Mezzanine Floor Plan for Installation of various CNC Turning centres on Vibration Isolators.

Kindly visit our website for more details about vibration isolation mounts for machinery installation on upper floors and mezzanine floor and rooftops.

http://www.vibrationmountsindia.com

Auto-Levelling Pneumatic Vibration Isolators

Fig1: Dynemech's DLPM Pneumatic Auto-Leveling Vibration Mount.

Dynemech's DLPM Mounts are low frequency vibration isolation pneumatic mounts. These Anti-Vibration mounts have auto levelling arrangement which consists of three isolators for 3-point precision levelling. Each isolator consists of a levelling valve which is the load sensing and height controlling element. Systems are supplied with automatic height control valves, tubing and all other pneumatic accessories necessary for complete systems installation.

This finds application in passive vibration control of CMM, Surface Plates and all types of Precision Measuring & Testing Machines.

Dynemech DLPM Mounts have minimal setting time. Long setting time using pneumatic isolators is not acceptable because precision measuring and positioning machines can suffer repeatability errors and

through-put losses.

These mounts are connected to continous air-supply and keep monitoring the load at 3 points and provide necessary levelling automatically. These mounts have been designed indigeneously in India and provide precise leveling accuracies of +/- 0.15mm over 1m.

Fig2: Surface Plate on Dynemech's DLPM Pneumatic Vibration Mounts.

Dynemech's Pneumatic Leveling feet provide low frequency vibration reduction and hence are very suitable for precison CMM machines or testing machines placed on top of surface plates.

Drastic reduction in passive vibrations affecting sensitive precision machines are the advantages of Dynemech’s Pneumatic Isolators besides providing long-term safety and life for the machine.

Visit us at:   http://www.vibrationmountsindia.com/  

DYNEMECH SYSTEMS @ IMTEX 2012, BANGALORE

Dynemech Systems will be showcasing their entire range of Anti-Vibration Mounts / Pads and Vibration Isolators at IMTEX 2012 at Bangalore International Exhibition Centre (BIEC) in Bangalore, India.

We are pleased to announce the IMTEX FORMING 2012 - Metal & Non-Metal (Plastics and Composites) International Forming Technology Exhibition at Bangalore International Exhibition Centre (BIEC) in Bangalore, India. IMTEX FORMING series is the largest exhibition of forming manufacturing technologies in South and South-East Asia.

IMTEX FORMING 2012 will exclusively show case the latest forming technologies not only for metals but also for plastics and other engineering materials like Composites and Ceramics which find wide application in engineering products.

Concurrent with IMTEX FORMING 2012 IMTMA is also organising Tooltech 2012 international exhibition on Dies & Moulds, Forming Tools, Machine Accessories, Metrology & CAD /CAM.

Each of these shows will present the latest machinery, equipment, processes, tools, accessories, software and raw materials and feed stocks required by manufacturers to produce formed parts.

The previous IMTEX FORMING exhibition was held from 21 - 26 January 2010, and featured participation of 427 companies. Spread over 25,000 square metres of gross area, IMTEX FORMING 2010 along with Tooltech 2010 had participation from 26 overseas countries, including 4 country-groups from Belgium, China, Taiwan and Germany. Other major overseas countries represented at the exhibition included Australia, France, Italy, Japan, Korea, Singapore, Spain, Switzerland, Turkey, UK, & USA.

The exhibition was host to around 44,000 business visitors from all across the Indian manufacturing industry. Interaction with business visitors led to a virtual sell-out of all machines displayed at the exhibition and further generated serious business enquiries to the tune of Rs. 12 billion.

Expectations are high about an upbeat investment environment in India around the time when IMTEX FORMING 2012 and Tooltech 2012 are scheduled. Indian economy and its industry are poised to take India to a new league at the global level in 2012. This in turn spells very high opportunities for machine tools and manufacturing solutions industry.

Dynemech Systems cordially invite you to visit our stall showcasing our entire range of products and technologies at IMTEX FORMING 2012 and Tooltech 2012 and also take advantage of the enhanced business opportunities at the exhibition.

 Visit http://www.vibrationmountsindia.com for more details.