High-performance Dynemech Screw Support Mounts have been
used to mount a Plastic Injection Moulding machine that has been
precision-fabricated. This has resulted in the creation of a foundation system
that is both sturdy and dependable, and it has been developed specifically for
high-precision manufacturing circumstances.
Dynemech Screw Support Mounts manufactured by Dynemech are designed
specifically for use in heavy-duty industrial applications. These Anti-Vibration
Mounts offer multi-directional vibration dampening, the ability to accurately
level, and steady load distribution. This ensures that the Injection Moulding Machine
is operating under the most favourable static and dynamic circumstances
possible, which is necessary for achieving high levels of dimensional
precision, repeatability, and cycle time efficiency over extended periods of
time.
Dynemech DLC Series Mounts are simple and effective
vibration dampers for machines with respective holes in the base. These mounts
offer both low frequency attenuation and stable machine levelling.
Dynemech DL series is used for light to medium weight
machines suited to Levelling Screw Support or having tapped hole in the base machine
levelling.
Dynemech DLM Series Mounts, developed in steel and stainless
steel respectively are simple and effective Vibration Dampers for machines with
respective holes in the base. these mounts offer low frequency attenuation,
stable machine levelling and vibration reduction.
Dynemech DLT series mounts are used in the machines which
must be anchored to the floor along with Levelling and Vibration Reduction.
Bolts with thru holes are provided in the machine foot, mount and anchored in
the floor nut. an insulating disc is provided between the nut and the machine
foot to prevent vibration from transmitting in the floor via the bolt. the
dimple and the thru hole in the mount are provided as per the bolt
specifications of the machine.
Dynemech Screw Support Mounts series DLK are simple and
effective Vibration Dampers for machines with respective holes in the base.
these mounts offer both low frequency attenuation and stable machine levelling.
the DLK series Vibration Damping and Levelling Mounts provide fast and easy
installation of machines. DLK series Anti Vibrations Mounts have steel body and
are used for machines having mounting holes in the base. this levelling mount
has a cover plate and dimpled bottom plate holding the insulation plate.
levelling is done by tightening the bolt which lifts the cover plate with the
machine base.
Advantages in terms of Mounting Configuration and Functionality:
• Vibration Isolation and Damping: The elastomeric components that are
incorporated into the Dynemech Anti-Vibration Technology are able to
successfully take up and decouple vibrations that are generated throughout the
moulding process. This is notably true during the high-pressure injection,
clamping, and screw recovery stages of the process.
The elimination of the transmission of mechanical energy to
the shop floor and the protection of neighbouring sensitive equipment are all
achieved with this method.
• Accurate Machine Levelling and Load Bearing: Each mount is equipped with a
threaded Screw System that allows for height adjustment, which enables accurate
machine levelling even on uneven terrain. Because of this, accurate horizontal
alignment is provided, which is necessary to guarantee uniform cavity fill and
prevent uneven tool wear throughout the mold.
• Mounting solution enables higher mold repeatability, better surface polish
on components, and lower defect rates, particularly in multi-cavity mold
arrangements. This is accomplished by reducing micro-movements and
foundation-induced disturbances, which in turn leads to increased process
stability.
• Increased Machine and Tool Life: The controlled damping environment reduces
the amount of stress that is placed on machine components such as guide rails,
tie bars, and injection units. Additionally, it protects tooling from premature
wear, which ultimately leads to decreased costs for maintenance and an increase
in the overall effectiveness of the equipment.
•Ease of Installation and Repositioning: The modularity of Dynemech Screw SupportMounts enables rapid mounting, alignment, and later re-alignment without the
need for grouting or floor adjustment. These Anti-Vibration Mounts are also
ideal for dynamic production cell layouts and facilities that are compliant
with Industry 4.0.
To learn more about our products https://www.vibrationmountsindia.com/products/
#InjectionMoulding, #DynemechMounts, #MachineInstallation,
#VibrationIsolation, #PlasticMoulding, #IndustrialMachinery,
#PrecisionEngineering, #ManufacturingSolutions, #SmartFactory, #MachineLeveling,
#ProductionEfficiency, #EngineeringExcellence, #FactoryAutomation
Phone: +91-9810760131
Email: sales@dynemech.com
Website: www.vibrationmountsindia.com
No comments:
Post a Comment