Series DLC Dynemech Heavy Duty Circular Machine Levelling Mounts constructed with a housing made of reinforced cast iron, an impact plate that is equipped with a Dynemech vibration isolation pad to mitigate vibrations, and a centre bolt located at the top to allow for levelling adjustment.
These mounts are specifically designed to efficiently and securely install machinery with plain holes in their base. They effectively isolate vibrations, provide stability, require minimal maintenance, and allow for precise leveling without the need for grouting.
Available with different combinations of elastomeric Dynemech Vibration Isolation Pads as well as without a mounting housing, Series DL. The bolt needed can be customised to the size of the hole in the machine base.
The Series DLC round mounts are placed between the machine feet and the floor, with the circular mount supporting the machine feet and isolating vibrations based on the machine's frequency and the selected natural frequency of the Screw Support Mounts and anti-vibration insulation plates.
Each Screw Support Mount includes a specialized elastomeric insulation plate at the bottom, tuned to different natural frequencies for various applications, ensuring excellent vibration isolation.
Zinc plated levelling bolt raises height of housing as per requirements. Locknut is to be tightened to the machine foot after levelling and installation for permanent positioning.
The top cast iron cover plate evenly distributes the load over the entire insulation plates for optimum performance. These mounts are suitable for machines with plain holes in their base, and leveling is achieved by adjusting the bolt, which raises the cover plate and the machine's leg. Different lengths and diameters of leveling screws are available to fit all types of machine leg bases.
Dynemech powder coated cast iron housing offer high load capacity , wear and tear resistant, fatigue proof support to the machinery.
They effectively isolate vibrations, provide stability, require minimal maintenance, and allow for precise levelling without the need for grouting.
The top cast iron cover plate evenly distributes the load over the entire insulation plates for optimum performance. These mounts are suitable for machines with plain holes in their base, and leveling is achieved by adjusting the bolt, which raises the cover plate and the machine's leg. Different lengths and diameters of leveling screws are available to fit all types of machine leg bases.
These mounts are commonly used in machines with significant unbalanced forces such as injection moulding machines, high-speed presses, punching machines, lathes, die casting machines, packaging machines, printing machines, shearing machines, centreless grinding machines, gear shapers, and other industrial machinery.
#DynemechLevellingMounts, #SeriesDLC, #HeavyDutyMounts, #VibrationIsolation, #MachineryStability, #IndustrialEquipment, #InjectionMolding, #PrintingMachinery.
Contact:
Dynеmеch Systеms Pvt Ltd.
Mob: +91-9810760131 ; +91-9911145131
Email: Salеs@dynemech.com
www.vibrationmountsindia.com
No comments:
Post a Comment