Pourquoi est l'impératif de solutions d'isolement de vibration CMM ?

Pourquoi est l'impératif de solutions d'isolement de vibration CMM ?

1. Haute Performance d'Isolement de Vibration
2. L'Installation de Machines rapide, Facile et Bon marchée - même sur les machines travaillant avec minimal en bas le temps
3. Le Plan d'étage de disposition flexible, introduisez le réendroit de machine délicatement pour loger des plans d'expansion et une induction de technologie - la mobilité Permanente de CMM avec les Monts de DLPM.
4. L'installation d'Équipements de Mise à l'essai et de Contrôle de Qualité Sensibles et de Lourdes Machines de Production possibles dans le même atelier
5. La Maintenance Basse et Facile d'Installer
6. Prévient la détérioration forcée de machine sensible, temps mort surprise cher et maintenance s'ensuivant dans les pertes de production.
7. Le Rasant de Machine automatique de 0.010mm et 0.2mm disponible.
8. Les solutions de différentes fréquences naturelles disponibles aller aux problèmes de vibration différents basés sur le rapport d'analyse de vibration.
www.vibrationmountsindia.com
contactez : sales@dynemech.com

Add caption

Add caption

The 4 Variants of Dynemech Anti Vibration Table

The anti vibration tables are available in Four variants as follows:

1.      Elastomeric   - 2 levels of vibration isolation – 1st at the leveling feet and 2^nd  5 layers of Dp insulation plates between granite plate and metal stand – No maintenance is required after installation – Natural Frequency 7-8 Hz. Vibration isolation in  the range of 80-90%

2.      Air Springs –Natural Frequency 4-6 Hz Vibration isolation 90-95% - Air pressure must be checked once in 15 days.

3.      Auto leveling pneumatic mounts – Natural Frequency 4-6 Hz. Vibration isolation 90-95% - continuous air supply is needed. The tabletop remains leveled to a repeatability of + 0.15mm for any load changes on top of the table.

4.  Auto leveling pneumatic mounts – Natural Frequency 4-6 Hz. Vibration isolation 90-95% - continuous air supply is needed. The tabletop remains leveled to a repeatability of + 0.015mm for any load changes on top of the table.

For more details contact :Dynemech Systems Pvt.Ltd.

sales@dynemech.com

+91-9810760131,+91-9911145131

www.vibrationmountsindia.com, www.dynemech.com

CMM VIBRATION ISOLATION SOLUTIONS

CMM VIBRATION ISOLATION SOLUTIONS

With increasing working speeds, production cycles and installed power combined with reduction in machine metal mass has led to increase in dynamic loads and more intense vibration generation. At the same time CMMs have increasing found favour in quality control departments with quick and accurate measurements of complex dimensioned parts. To achieve production efficiency to combat the competitive manufacturing environment, more precise measuring & testing equipments are being installed in the same shop floor as the production machinery. Manufacturing excellence in such modern shop floors can be limited only by transient vibrations from basic production machinery to precise finishing machines & measuring labs. Dynemech Pneumatic Isolation system reduces the incoming vibration level to the great extent while maintaining required rigidity and levelling accuracy. Isolated foundation for CMM reduce high frequency and low amplitude vibrations passing in to the CMM. The inertia mass (Concrete Block) maintains machine stability.

#bakergauges #hexagon #zeiss #accurategauging #electronica #mitutoyo Coordinate measuring Machines on Dynemech antivibration #CMM Supports

Passive Isolation Of Cmm & Measuring Machines 

Vibration Isolation Treatments for Coordinate Measuring Machines

Why is CMM vibration isolation solutions imperative?

1. High Vibration Isolation Performance
2. Fast , Easy and Inexpensive Machinery Installation - even on working machines with minimal down time
3. Flexible layout Floor Plan , ease in machine relocation to accommodate expansion plans & technology induction - Permanent mobility of CMM with DLPM Mounts.
4. Installation of Sensitive Quality Control and Testing Equipments and Heavy Production Machinery possible in the same workshop
5. Low Maintenance and Easy to Install
6. Prevents forced deterioration of sensitive machine, expensive unscheduled downtime and maintenance resulting in production losses.
7. Automatic Machine Levelling of + 0.010mm and + 0.2mm available.
8. Solutions of different natural frequencies available to suit various vibration problems based on vibration analysis report.

www.vibrationmountsindia.com

contact: sales@dynemech.com

Dynemech's Anti Vibration Tabellen

Dynemech's Anti Vibration Tabellen sind ideal zum Testen/Qualität Laboratries in Zusammenarbeit mit industriellen Einheiten in hohes Maß an Vibrationen durch Arbeitsmaschinen wie Pressen, Hämmer, Vmcs etc. Ein anti vibration Tabelle befindet, die für die Zusammenarbeit mit Analyse- und Laborwaagen oder Kontrolle der Skalen entwickelt. Unsere Anti-Vibration Tabellen haben einen Granit Oberfläche Platte mit Grad-1-Genauigkeit für sehr genaue Messgenauigkeit. Auch, Schwingungsdämpfung in unseren Tabellen an zwei Standorten - unter dem Granit Tisch oben und unten vorgesehen sind, haben wir die höhenverstellbaren Füße, die in der korrekten Ausrichtung der Tabelle, als auch helfen kann, die Isolierplatte unerwünschte Schwingungen zu entfernen. Auch wir können wählen Sie Single oder Dual Layer Isolierplatte in Abhängigkeit von den Schwingungen im Prüflabor. Die Vibration isoliert Tabelle (VIT) findet Einsatz in kritischen Bereichen, in denen die Messgenauigkeit von Instrumenten wie Waagen, Härteprüfgeräte, Spektroskope, Rauheit Tester, Galvanometer, Elektronische Mikroskope und Atomic Absorption Spektralphotometer, die durch Vibrationen betroffen ist.

www.vibrationmountsindia.com

Kontakt: sales@dynemech.com

VIBRATION REDUCTION SOLUTIONS FOR Mechanical presses

VIBRATION REDUCTION SOLUTIONS FOR Mechanical presses

All metal forming operations -Blanking, Drawing or Forming on the press produce very large impact forces.These forces travel through the press frame into the foundation. The foundation produces a rebound force equal to the impact force and this travels inside the machine. These internal forces are produced by the stamping operation on a press when the press is bolted to a foundation or installed on isolators. However, the magnitude of the vibration within the press is lower when using vibration isolators. Bolting the press rigidly to a foundation subjects it to more vibration and impact force. Vibration isolators are cushions that transform a sudden shock pulse into a decaying series of longer duration forces. Imagine the force of hitting a wall with our fist. Now hitting the wall with the same energy, but with our hand in a boxing glove. It is obvious that the later hurt less! This is because the impact duration is longer, effectively reducing the impact force. Short duration impacts mean higher force.

This same thing happens on a press rigidly bolted to the foundation. The sudden release of potential energy at impact causes the press foot to slam against the foundation. This fast duration, high magnitude force hits the foundation and the foundation responds in kind, sending damaging forces back into the press. In case the press is isolated from the foundation with Dynemech passive vibration isolators, the isolators will absorb most of the impact energy of the blow. Now, the impact force at the foundation is reduced and also the rebound force transmitted by the foundation into the press machine

For further details contact:

DYNEMECH SYSTEMS PVT. LTD
Rohini, Delhi- 110085.
Cont.-011-27347982,9810760131,9911145131
E-mail: sales@dynemech.com
Website: www.vibrationmountsindia.com

Vibration Isolation Solutions for a Power Press

AntiVibration Mounts for high impact producing Power Presses

Vibration and Shock Isolation Systems for  Stamping Presses, Mechanical Presses,

Your Best Way to Install and Level Heavy Presses for Effective Vibration and Noise Control

Vibrations and their consequences are not only detrimental to the immediate surrounding production area, they also

negatively affect manufacturing and quality processes in the vicinity and disrupt the neighbourhood and the environment and susbequently worker health. 

Dynemech Anti Vibration Tables

 Dynemech presents anti vibration tables in four variants to meet almost all types of industrial requirements of vibration isolation of precision measuring and testing equipments. Our antivibration tables eliminates vibrations from very low frequency to very high frequency ranges. These can be placed in the high vibration production zone for in process measurements using very high precision quality control equipments. These Vibration-Isolated Tables can also be placed on suspended floors in a building. The amplitude of vibration tends to be higher on suspended slabs of a building making it is very difficult to operate these precision measuring machines on these suspended floors without using vibration isolations systems. Our AV-Tables are well equipped to handle diverse types of vibration problems faced by customers on these suspended floors. The problem of vibration transmission may be aggravated even by walking on the floor, vibration travel from rooftop machineries or nearby vehicular movements.

 The four variants are listed below:

1.      Elastomeric (DIT-E)  - 2 levels of vibration isolation – 1st at the leveling feet and 2^nd  5 layers of Dp insulation plates between granite plate and metal stand – No maintenance is required after installation – Natural Frequency 7-8 Hz. Vibration isolation in  the range of 80-90%

2.      Air Springs (DIT-AS) –Natural Frequency 4-6 Hz Vibration isolation 90-95% - Air pressure must be checked once in 15 days.

3.      Auto leveling pneumatic mounts (DIT-AL) – Natural Frequency 4-6 Hz. Vibration isolation 90-95% - continuous air supply is needed. The tabletop remains leveled to a repeatability of + 0.15mm for any load changes on top of the table.

4.  Auto leveling pneumatic mounts (DIT-AM) – Natural Frequency 4-6 Hz. Vibration isolation 90-95% - continuous air supply is needed. The tabletop remains leveled to a repeatability of + 0.015mm for any load changes on top of the table.

For further details contact:

DYNEMECH SYSTEMS PVT. LTD
Rohini, Delhi- 110085.
Cont.-011-27347982,9810760131,9911145131
E-mail: sales@dynemech.com
Website: www.vibrationmountsindia.com

Dynemech Range of Anti Vibration Tables

Dynemech Anti Vibration Tables

Dynemech Anti Vibration Tables

Dynemech's Anti-Vibration Tables are ideal for Testing and Research Cleamrooms requiring critical vibration control, medical setups affected by environmental vibration transmission, or Quality Control Laboratories co-located with industrial units having high degree of vibration due to working machines like presses, hammers, VMCs etc.

An anti vibration table find applications for metrology, microscopy, Coordinate Measuring Machines, form measurement, life sciences, physical sciences, medical equipments, clean room labs, photonics and optical systems,  balances and scales, sensor systems, precision scientific measurement and test equipments-gear measuring and testing, analytical balances, surface measuring , harness testing, roundness testers, roughness testers and many more..

And as we all know, vibrations in varied scenarios  have the potential to disrupt vibration- or noise-sensitive operations in testing and experimental or research  setups. Vibration-sensitive facilities such as hospitals, research and testing laboratories and sensitive manufacturing units  often contain equipment that can be adversely affected by even small levels of floor vibration.

Most quality control laboratories and testing and research facilities will experience some nominal level of floor vibration due to automotive traffic, building sway, auxiliary machinery such as elevators, heating and ventilation systems, HVAC equipment or pumps and industrial machinery manufacturing units nearby. The magnitude of these disturbances usually depends on their proximity to the sensitive equipments, the type of building construction and their location within the building. Laboratories located on ground floors typically will experience lower levels of vibration compared with upper levels of that same building because of structural characteristics. These vibrations, although acceptable to people, cannot be tolerated by sensitive equipment used in research, precision manufacturing, high accuracy measurements and quality control.

For more details contact :Dynemech Systems Pvt.Ltd.

sales@dynemech.com

+91-9810760131,+91-9911145131

www.vibrationmountsindia.com, www.dynemech.com

28-31 जुलै 2017 -Machine साधन प्रदर्शनामध्ये - Dynemech IMTOS 2017 आमंत्रित केले

Dynemech प्रणाल्या मनापासून आपण आमच्या स्टॉल क्रमांक 3 हॉल क्रमांक 12 भेट IMTOS उत्पादनांचा व उत्पादन क्षेत्रासाठी तंत्रज्ञानाचा आमच्या संपूर्ण विन्यास दाखवण्यासाठी आमंत्रित - भारतीय मशीन टूल्स 2017 दर्शवा आणि प्रदर्शन सुधारीत व्यवसाय संधी लाभ घेण्यासाठी.

आपल्या भेटी करण्यासाठी उत्सुक ...

 28 | 29 | 30 | 31 जुलै 2017

@ प्रगती मैदान, दिल्ली

नाही स्टॉल. 3 हॉल नाही. 12

  

उत्पादन उद्योग विरोधी कंप तंत्रज्ञान

हातोडी आणि हेवी पॉवर दाबल्यास  शॉक Isolators

 Elastomeric शॉक शोषकांवर

फोर्जिंग दाबल्यास साठी  वसंत ऋतु Isolators

 Vibro प्रेस आरोहण

 पाचर घालून घट्ट बसवणे कंप नियंत्रण आरोहण

 कंप एकाकी टेबल

 रबर इन्सुलेशन चेंडू

 ऑटो Levelling रबर हवाई स्प्रिंग्स

 रबर धातू उत्पादने

 परिपत्रक कंप अवमंदित आरोहण

 फाउंडेशन आसोलेशन

 Levelling घटक

 प्रिसिजन कंप नियंत्रण Fixators

 मशिनरी उभारणीचा ब्लॉक्स

 स्टॅम्पिंग प्रेस आरोहण

 CMM कंप नियंत्रण सोल्युशन्स

 जनरल औद्योगिक यंत्रणा

DYNEMECH SYSTEMS @ IMTOS - Indian Machine Tools Show 2017 (from 28-31 July 2017) Pragati Maidan, Delhi

DYNEMECH SYSTEMS @ IMTOS - Indian Machine Tools Show 2017 (from 28-31 July 2017) Pragati Maidan, Delhi 

संपर्क: Dynemech Systems Pvt. Ltd.

Sector-14, Rohini, Delhi - 110085, India

Mobile: +91-9810760131 , +91-9911145131 , +91-9212258131

Phone: +91-11-27347982 

 E-mail: sales@dynemech.com, enquiry@dynemech.in

Website: www.dynemech.com; www.vibrationmountsindia.com

http://vibrationmountsindia.com/Dynemech-Anti-Vibration-Pads-Vibration-Control-solutions-at-IMTOS-2017-DELHI.html

DYNEMECH SYSTEMS @ IMTOS - Indian Machine Tools Show 2017

Dynemech Systems cordially invite you to visit our Stall No. 3 Hall No. 12 showcasing our entire gamut of products and technologies for the Manufacturing Sector at IMTOS - Indian Machine Tools Show 2017 and also take advantage of the enhanced business opportunities at the exhibition.

Looking forward to your visit...

 28 | 29 | 30 | 31 July 2017

@ Pragati Maidan, Delhi

STALL NO. 3 HALL NO. 12

  

Anti-Vibration Technology for Manufacturing Industry

• Shock Isolators for Hammer & Heavy Power presses
• Elastomeric Shock Absorbers
• Spring Isolators for Forging Presses
• Vibro Press Mounts
• Wedge Vibration Control Mounts
• Vibration Isolated Tables
• Rubber Insulation Pads
• Auto Levelling Rubber Air Springs
• Rubber Metal Products
• Circular Vibration Damping Mounts
• Foundation Isolation
• Levelling Elements
• Precision vibration Control Fixators
• Machinery Raiser Blocks
• Stamping Press Mounts
• Generator Pads
• CMM Vibration Control Solutions
• Pneumatic Isolation
• General Industrial Machinery

http://vibrationmountsindia.com/Dynemech-Anti-Vibration-Pads-Vibration-Control-solutions-at-IMTOS-2017-DELHI.html

Dynemech @ DELHI – MTX 2017 -Delhi Machine Tool Expo 2017

Dynemech Systems cordially invite you to visit our Stall No. A120 Hall No. 11 showcasing our entire gamut of products and technologies for the Manufacturing Sector at Delhi - MTX 2017 and also take advantage of the enhanced business opportunities at the exhibition.

Looking forward to your visit...

 10 | 11 | 12 | 13 August 2017

@ Pragati Maidan, Delhi

STALL NO. A120 HALL NO. 11

  

Anti-Vibration Technology for Manufacturing Industry

• Shock Isolators for Hammer & Heavy Power presses
• Elastomeric Shock Absorbers
• Spring Isolators for Forging Presses
• Vibro Press Mounts
• Wedge Vibration Control Mounts
• Vibration Isolated Tables
• Rubber Insulation Pads
• Auto Levelling Rubber Air Springs
• Rubber Metal Products
• Circular Vibration Damping Mounts
• Foundation Isolation
• Levelling Elements
• Precision vibration Control Fixators
• Machinery Raiser Blocks
• Stamping Press Mounts
• Generator Pads
• CMM Vibration Control Solutions
• Pneumatic Isolation
• General Industrial Machinery

http://vibrationmountsindia.com/Dynemech-Anti-Vibration-Mounts-Vibration-Damping-solutions-at-DMTX-2017-Delhi.html

Holi--A festival of Vibrant Colorful Happy Moments

“Dynemech wishes one and all a spectacular Holi--A festival of Vibrant Colorful Happy Moments”

Happy Holi

A Celebration of Joy, Happiness, Colors

Best Wishes

Team Dynemech 

Dynemech Systems Pvt. Ltd.

Email: sales@dynemech.com

Phone: +(91)-9810760131, +(91)-9911145131, +(91)-9212258131

www.vibrationmountsindia.com; www.dynemech.com

Dynemech Systems

Low Natural Frequency DIT-AM Series AntiVibration
Table

Dynemech
started its journey in the year 2000 with a goal to provide cost effective
vibration isolation technology and anti-vibration machinery mounting solutions
to Indian industries for Precision Machine Tools/Metrology Equipments. Dynemech
has designed a number of Anti-Vibration Solutions to achieve vibration and
shock isolation over a wider frequency range with lower transmissibility and
optimal machine performance.

Continuing
with the same aim, Dynemech this year introduces low frequency anti vibration
table series DIT-AM designed and manufactured indigenously. DIT-AM
Series AntiVibration Table launched in IMTEX 2017
(STALL NO. B-106 HALL NO.3C)  damps most
of the incoming vibrations above 6 Hz. Quality and performance  are at par with imported Vibration Isolation
Tables but prices compatible to Indian market, thus making in more accessible
to our manufacturer's and research institutions.  

The
top platform and equipment are supported by four or six membrane air springs
depending upon the size of table and the load it has to support. Three point
leveling system ensures stable and quick leveling of the tabletop platform. It
has two chambers - load and the damping chamber. A thin diaphragm lifts the
load upon charging the air spring. The damping can be controlled using external
valve to some extent. A back pressure relief valve releases excess air from the
system. The levelling during setup is done using Screw Support DLM mounts under
each leg. DLM mounts are assembled with a special designed insulation plates  DP1 or DP3 which damps higher frequency
incoming vibrations. The self levelling is done by plunger, piston mechanism.
The top platform self levels  itself to
the  repeatability of  + 0.15mm for any load changes on the
surface. The top granite plate has grade 0 flatness accuracy. It is suitable
for trouble free usage of all Metrology, Optical and Precision Measuring and
Testing Equipments like Profile Projectors,
Microscopes, hardness testers, roundness testers, Gear profile testers, surface
roughness measuring machine, Contour Testing Machine, Surface Plates even in high vibration zones like shop floors itself
for in process measurements.

Salient Features.

1. DIT-AM Series of AV Table
provides  stable operating conditions for high precision
measuring instruments.

2. It
incorporates high performance vibration isolation. Lowers Natural Frequency in the range of 2.5 to 3 Hz.
It damps most of the incoming vibrations and ensures smooth working of all
precision equipments even in the high vibration area.

2. Top surface plate levels
itself to the repeatability of + 0.15mm for any load changes on top of
the granite surface plate to ensure
immediate relevelling. Continuous air supply of up to 6 bar is required.

3. Three point leveling
system ensures stable , quick leveling of the table top with vibration
cancellation

4. Damping can be adjusted
using an external valve.

5. The leveling during setup
is done using Screw Support DLM mounts under each leg which also damps most of
the high frequency incoming vibrations. Ensures dual vibration damping

 6. The top surface plate has grade 0 flatness
accuracy ideal for Quality Control Laboratories.

7. Back pressure relief
valve releases excess air from the system.

8. Suitable for Metrology
equipments, Optical equipments, Microscopes,Balances and all types of precision
measuring and testing equipments

For more details
contact :

Dynemech Systems Pvt.
Ltd.

sales@dynemech.com

Contact:
+91-9810760131,+91-9911145131

www.vibrationmountsindia.com, www.dynemech.com